Butiken för onlineutbildning i fordonsteknik

Nöjdhetsgaranti

Fantastiskt, du har kommit till Prodiags butik för onlineutbildning i fordonsteknik.
Ifall du letar efter traditionella böcker eller bara instruktionsvideor har du kommit till fel plats.

Våra utbildningsmoduler är utvecklade av kunniga tekniker och instruktörer, som insett att kunskapen inte utvecklas av att se på när andra jobbar eller genom att se på videor. Framgångsrik fordonsutbildning motsvarar mekanikerns behov, frångår inte ämnet, ger exempel från verkliga problem, och bäst av allt, motiverar dig att använda din hjärna. Samma recept är ryggraden i Prodiags utbildningsmoduler — utan resande eller fasta tidtabeller.

Historieberättandet i utbildningsmodulen är banbrytande och studierna visuellt smarta. Animationerna gör svåra saker enkla att förstå, bilderna ger en kontaktyta till fordonstekniken och riktigt arbete, videor fungerar som exempel vid behov, och texterna upplyfter din fantasi. Tack vare våra kunder innehåller modulerna även ett utskrivbart material som guidar dig som en “virtuell lärare”. Det är praktiskt tillämpade exempel baserade på riktig arbetserfarenhet.

När du känner att du behärskar ämnet, kan du utmana dig själv med uppgifterna. Ett varningens ord, utan att studera kommer du troligtvis inte att klara dem — men du kan alltid försöka.

Som bevis på ditt kunnande, för dig själv och andra, kan du skriva ut ett diplom efter att du klarat slutprovet.

Efter beställningen får du:

  • 12 månaders tillgång till det köpta materialet – utan månadsprenumerationer.
  • tillgång till att njuta av banbrytande Prodiags utbildningsmoduler för fullt
  • ett diplom efter avklarat slutprov

Vi ger dig en 100% nöjdhetsgaranti på alla våra produkter — är du inte nöjd får du pengarna tillbaka.

Varför Prodiags? Stäng

Electricity

32.00  (~$34.60)

In this study module we repeat the basic overview of electrical engineering and have added information on the use of a multimeter for you to learn. With the know-how from this module, you can apply electrical engineering skills in the first practical tasks.

  • How electricity is generated and how its phenomena can be utilised
  • Electrical engineering in a generator, actuator and detector
  • The multimeter and basic measurements
  • Utilisation of the multimeter and making use of a power clamp
  • The practical application of multimeter measurements
  • Studying and applying electrical engineering variables
  • Practical application of power and voltage laws
  • Practical application of measurement results and basic laws of electrical engineering

Why this module?

Electrical engineering is often part of the study of physics. However, often theoretical study does not give you the ability to take advantage of the expertise in practical work. All the knowledge and skills needed for practical application are in this learning module.

Learn how electricity works with these easy-to-understand studies in this online training module. Learn about the basic laws of electricity, how to use a multimeter and more.

What will you learn?

In the introduction to electrical engineering, you will learn at the required level, the basic phenomena of electricity, how electrical current and magnetism are connected to each other in the generation and use of electricity. You will understand how electric current is generated by a traditional generator and how other ways of doing this differ.

Learn how to properly use the multimeters different functions, and how to get the correct readings when measuring a car’s electrical system with a multimeter. Learn how to use a current clamp, and how to measure with measuring probes with this online training module.

In order for the use of the electrical and quantitative principles of electrical engineering to be useful mathematically, the basic functions and use of the multimeter are added to the learning. You will be presented with the structure and measurements of the instrument. With practical examples, you can perform these measurements and get tangible results for voltage, resistance, and current.

In the third part you will study basic electrotechnical variables: the basics for voltage, resistance, current and power. Additionally you will learn what these figures reflect in electrical engineering, how they should be understood and how they become concrete in practice.

The learning introduces you to the mathematical application of electrotechnics through practical examples. The purpose of sample results and calculations is to guide you to make similar mathematical applications with your own measurement results. This will help you achieve the true know-how of electrical engineering; “The practical application of electrical engineering”.

Learn what voltage is, and how to easily understand voltage, current and resistance with this training for mechanics and others in the automotive industry.

Do you know how to properly measure and calculate the power of a starter motor? With this online training module you will learn how to properly calculate the power based on voltage and current, measured with a current clamp.

Open Product Sheet (PDF)