Autotekniikan verkkokoulutus-myymälä

Tyytyväisyystakuu

Hienoa, olet saapunut Prodiags verkkokoulutus-kauppaan. Jos etsit perinteisiä autoalan kirjoja tai pelkkiä ohjevideoita olet väärässä paikassa.

Koulutusmoduulimme ovat kehittäneet huippumekaanikot ja autoalan kouluttajat, jotka ovat huomanneet että taidot eivät kehity seuraamalla toisten työntekoa tai katsomalla videoita. Onnistunut autotekniikan koulutus vastaa mekaanikon käytännön tarpeisiin, ei lipsu aiheesta, antaa esimerkkejä oikeista ongelmista, ja mitä parasta, motivoi sinua käyttämään aivojasi. Sama toimii myös Prodiags koulutusmoduulien selkärankana — ilman tarvetta matkustamiselle tai kiinteitä aikatauluja.

Tarinan kerronta koulutusmoduuleissa on maata mullistavaa ja opiskelut ovat visuaalisesti älykkäitä. Animaatiot tekevät monimutkaisista asioista helppoja ymmärtää, kuvat antavat kontaktipinnan autotekniikkaan ja oikeaan työhön, videot toimivat esimerkkinä tarvittaessa ja tekstit herättävät mielikuvituksesi. Kiitos asiakkaillemme, moduulit sisältävät myös tulostettavan tehtävämateriaalin, mikä ohjaa sinua “virtuaalisena opettajana”. Sen soveltavat käytännön tehtävät perustuvat aitoon työtilanteisiin.

Kun uskot hallitsevasi aiheen, voit haastaa itsesi tehtävillä. Varoitus, ilman opiskelua et luultavasti läpäise niitä — mutta voit aina yrittää.

Todisteena osaamisestasi, itsellesi ja muille, voit tulostaa todistuksen hyväksytyn loppukokeen jälkeen.

Tilauksen jälkeen saat:

  • 12 kk:n lisenssin ostettuun moduuliin — ilman kuukausimaksuja.
  • pääsyn nauttimaan täysillä mullistavista Prodiags koulutusmoduuleista
  • todistuksen hyväksytyn loppukokeen jälkeen.

Tarjoamme 100% tyytyväisyystakuun kaikille tuotteillemme — jos et ole tyytyväinen palautamme rahasi.

Miksi Prodiags? Sulje

Hybrid & Electric Vehicle Technology

(3 tuotearviota)

$ 41.39

There are many dangers concerning working on electric and hybrid vehicles. To make sure you are safe, you have to know the basics of the different systems and how to find the recent information about a specific model. Electrical safety is key when working on EV and HEV. With this training model you learn how to perform your work correctly and safely.

Find the answer to these questions, and much more:

  • Learn General Hybrid and Electric Vehicle Technology
  • How does high-voltage systems work?
  • How to drive and charge EVs?
  • How to perform maintenance on hybrids and electric vehicles?
  • What are common HEV and EV faults?
  • What to do in case of electric shocks and accidents?
  • How to give First Aid?
  • Is EV collision damage dangerous?
  • How to consider battery chemicals and magnetism?
  • What safety requirements should be followed in the workshop?
  • What personal protective equipment (PPE) and hand tools do I need to work on hybrids and electric cars?
  • What measuring and testing equipment is needed for working on EVs?
  • Example of De-energising the vehicle

Why this module?

Hybrid and electric vehicles are here to stay, as they offer a more environmentally-friendly method of transport. Mechanics need to acquire new skills to carry out servicing and repairs safely. The high-voltage systems used in these vehicles present new dangers and demand new responsibilities to ensure safety.

What will you learn?

In this module you will learn the basics of hybrid and electric vehicle technology and become familiar with normal operation such as driving and charging. You will be better informed about potential dangers and the importance of using the right tools and working methods to avoid accidents. You will also learn what to do in the unlikely event of an accident.

Learn how charging a hybrid or electric vehicle works with this online training module for mechanics and others working in workshops or the automotive industry.

What is your level of knowledge today? Are you up to date with this new technology? Do you know how to safeguard yourself and your co-workers from harm, and know how to act in the event of an accident?

With this hybrid and electric vehicle training module you will learn how charging a hybrid or electric vehicle works. You will also learn how to measure the electrical system to ensure that the vehicle i safe to work on. Measuring a high voltage system in a car can be very dangerous, and you have to know the correct procedures to ensure your safety. This applies to working on a hybrid or electric vehicle in general.

Working on a hybrid or electric vehicle requires further preparations and caution than working on regular combustion engined cars. Learn how to mark the working area around the car, and how to mark the different components of the car to ensure a safe working environment for everyone at the workshop.

Open Product Sheet (PDF)

 

Note! This module is also available with Finnish legislation and national regulations. Contact us at sales@prodiags.com or your contact person for more information.

Learning Outcomes

As a result of taking this module you will be better equipped to carry out servicing and repairs on hybrid and electric vehicles in an effective and safe manner, Your broader understanding of high-voltage technology will be key to avoiding accidents and hazards. Once you have completed the training module, you will be in a good position to open the discussion on how to improve working procedures in your workplace.

Certification

After completing your studies and appropriately completed assignments, you will complete the final exam. After completing the final test, you can print a Prodiags certificate from your performance record to mark your expertise.

Digitally verified certificate for completion of the Training Module

 

Open Product Sheet (PDF)

Prerequisites

To reach all learning outcomes you need to have a basic knowledge of automotive electricity and electronics. Troubleshooting skills and experience will also be an advantage.

 

Content Equivalence

This course’s topics and objectives correspond in scope to a conventional 2 day training event.

Once you have made your payment, you get immediate access to the content in the form of a license valid for 12 months. You’ll save time and money by not needing to travel.

System Requirements

Internet connection and PC or laptop with browser. Recommended screen resolution 1024 x 768 or higher.

Updates

We want to make sure that you always have the latest version of our product.
Prodiags reserves the right to make real time updates and changes.
This way you’ll always have the best version, without extra fees.

Open Product Sheet (PDF)

1/4 – Olen mekaanikko ja tahdon välittää maksun esimiehelleni, miten tämä onnistuu?

  • Kun tilaat Prodiags koulutusmoduulin voit helposti välittää maksun esimiehellesi tai vaikka äidillesi. Avaa/tulosta linkin tilausohje.

Tulostettava tilausohje (PDF) 


2/4 – Miten voin tarjota mekaanikoilleni hyödyllistä koulutusta esimerkiksi kun asiakas peruu ajanvarauksensa?

  • Verkkokoulutusmoduulin avulla voit hyödyntää vapaat ajat varauskalenterissa ja peruutetut asiakastyöt tehokkaaseen koulutuskäyttöön.
  • Jos sinulla on kunnianhimoinen mekaanikko, jonka tasoa haluat nostaa, Prodiags koulutusmoduulit ovat helpoin ja tehokkain tapa aloittaa koulutus.

Lue lisää hyödyistä >> Korjaamopäällikkö


3/4 – Mitä osaamista minulta vaaditaan voidakseni tarjota lisäarvoa koulutuksilleni ennakko-opetuksen ja verkkomateriaalin avulla?

  • Materiaalin käyttöönotto vaatii sinulta vain muutaman klikin. Tilaat koulutusmateriaalin, lisäät osallistujat ja ennakko-opetus on käynnissä.
  • Koulutusmoduulin tehtäväsarjojen keskeinen lisäarvo: kouluttaja ja koulutettava tietää lähtötasonsa, mikä pitää yllä kiinnostuksen koulutusta kohtaan.

Lue lisää >> Kouluttaja / Opettaja


4/4 – Miten voin jakaa ja esittää Prodiags tuotteet yhteisölleni?

  • Prodiags verkkokoulutusmoduulit ovat tarkoitettuja kaikille autoalasta kiinnostuneille. Teemme yhteistyötä erilaisten vaikuttajien kanssa, emmekä sido yhteistyökumppaneitamme brändiimme.
  • Jos olet kiinnostunut esittämään oman yhteistyöideasi meille, ole hyvä ja täytä vaikuttajalomake ja kerro meille itsestäsi ja ideastasi.

Avaa vaikuttajalomake (englanniksi) >>